TracetoForge Blog

Guides and tutorials on creating custom tool inserts with 3D printing. Milwaukee Packout, Gridfinity, and more.

Turn a Drawing into a 3D Printable Object

Sketch a shape on paper, photograph it, and export a printable STL. The same tracer that cuts tool cavities also extrudes solid objects. No CAD required.

Photo to Gridfinity: Measure, Trace, and Check the Fit

Turn a phone photo of any tool into a printable Gridfinity bin. Paper-based scaling, tolerance and fit checks, STL and 3MF export.

TracetoForge vs Tooltrace vs GridPilot vs Tracefinity (2026)

TracetoForge, Tooltrace, GridPilot and Tracefinity side by side: free tiers, pricing, export formats and multi-tool layouts, with sources.

Gridfinity in Milwaukee Packout Drawers: Setup Guide

Install a 9×6 Gridfinity baseplate in a Packout drawer. Drawer dimensions, baseplate sizing, mounting, and custom tool inserts. Works with the 48-22-8443 3-Drawer and 48-22-8442 2-Drawer.

Photo Tips for a Clean Tool Trace

Five things that matter for a clean trace: paper, lighting, camera angle, tool prep, and Sensitivity slider tuning. Common failure modes and fixes.

Wera Screwdriver Gridfinity Bin: Photo-to-Print Walkthrough

Build a 6×3 Gridfinity bin for a 12-piece Wera Kraftform set from a phone photo. Sizing, cavity depth, finger notches, print settings.

Wrench Set Gridfinity Bin from a Photo

Custom Gridfinity bins for combination, ratcheting, stubby, and ignition wrenches. SAE, metric, and combined-set layouts. Per-brand tolerance notes.

Drill Bit Storage in Gridfinity: Custom Bin Layouts

Tip-up vs tip-down, parametric vs photo-trace, single-set vs multi-set. Twist drills, brad-point, Forstner, step drills, hole saws, spade bits.

Reusable Tool Library for Custom Drawer Trays

Save your traced tools and reuse them across any Gridfinity bin, Packout insert, or drawer tray without re-tracing.

Custom Milwaukee Packout Inserts: 3D Print Your Own

Make fitted Packout inserts from a photo: case and drawer interior sizes, cavity depth, three ways to fill a drawer, and print settings for full-drawer trays.

Make a Replacement Gasket from a Photo, Bolt Holes and All

Photograph a dead gasket and get a cutting template with bolt holes detected automatically. Calibration sheet for exact bolt spacing. SVG, DXF, STL, and 3MF exports.

Measure a Tool from a Photo With a Sheet of Paper

Skip the calipers. Paper size detected automatically, perspective corrected, holes measured too. Plus when to use the calibration sheet instead.

Gridfinity vs Packout vs Custom Trays: Which to Pick

Three insert systems compared on cost, print time, drawer fit, and how easy each is to modify. A straight answer on which one suits your setup.

3D Printed Tool Inserts vs Kaizen Foam

Cost breakdown, durability comparison, and why 3D printed inserts are replacing foam.

How to Organize a Milwaukee Packout: Real Layouts

Drawer-by-drawer Packout layouts using 3D printed inserts and Gridfinity bins. What fits where, which drawers waste space, and how to cut trays for your own tools.

Image to STL for Tool Outlines: Free Trace & Preview

Trace a photo into an STL, 3MF, SVG, or DXF outline file. Which format to use, output modes, and fixes for shadows, reflections, and scale errors.

Gridfinity Custom Cutout From a Photo (No CAD)

Generate a Gridfinity cutout from a photo of your tool. No Fusion 360, no OpenSCAD, no parametric setup. Upload, trace, export STL in about 2 minutes.

3D Printed Tool Organizer Ideas and Fit Guide

Ten organizer ideas worth printing, plus filament choice, tolerances, and print settings for organizers fitted to your exact tools.

Knipex Pliers Organizer: Cobra, Pliers Wrench, TwinGrip

Printable organizer inserts fitted to Knipex Cobra 125-300mm, Pliers Wrench, TwinGrip, and diagonal cutters. Gridfinity and Packout compatible, or trace your own.

Gridfinity Generators Compared: Parametric vs Photo-Based

Compare the best Gridfinity generators. Parametric tools for simple bins vs photo-based generators for precision tool cutouts.

Back to TracetoForge